Brother DCP-8085DN User Manual page 84

Error Message
Replace Parts
Drum
Replace Parts
Fuser Unit
Replace Parts
Laser Unit
Replace Parts
PF kit MP
Replace Parts
PF kit 1
Replace Parts
PF kit 2
Rename the File
Replace Toner
Scanner Locked
Scan Unable XX
Cause
The drum unit is the end of its life. Replace the drum unit.
The drum unit counter was not
reset when a new drum was
installed.
It is time to replace the fuser unit. Call your Brother dealer to replace the fuser
It is time to replace the laser unit. Call your Brother dealer to replace the laser
It is time to replace the paper
feeding kit for the MP tray.
It is time to replace the paper
feeding kit for Tray 1.
It is time to replace the paper
feeding kit for Tray 2.
There is already a file on the USB
Flash memory drive with the
same name as the file you are
trying to save.
The toner cartridge is at the end
of its life and printing is not
possible.
The scanner lock is locked.
The machine has a mechanical
problem.
Document is too long for duplex
scanning.
Troubleshooting and routine maintenance
Action
(See Replacing the drum unit on page 98.)
1 Open the front cover, and then press
Clear/Back.
2 Press 1 to reset.
unit.
unit.
Call your Brother dealer to replace the
PF Kit MP.
Call your Brother dealer to replace the
PF Kit 1.
Call your Brother dealer to replace the
PF Kit 2.
Change the file name of the file on the USB
Flash memory drive or the file you are trying
to save.
Replace the toner cartridge with a new one.
(See Replacing a toner cartridge
on page 95.)
Open the document cover, and then release
the scanner lock lever.
Press Stop/Exit.
Disconnect the machine from the power for
several minutes, then reconnect it.
Press Stop/Exit. Use the appropriate size of
paper for duplex scanning. (See Scan
on page 123.)
C
77