Checking The Remaining Life Of Parts; Reset; How To Reset - Brother DCP-8085DN User Manual

Checking the remaining life of
parts
You can see the remaining life of the
machine's drum unit and periodic
maintenance parts on the LCD.
a
Press Menu, 6, 7.
b
Press a or b to choose 1.Drum,
2.Fuser, 3.Laser, 4.PF kit MP,
5.PF kit 1 or 6..PF Kit 2
Press OK.
1
PF Kit 2 appears only when the optional
LT-5300 tray is installed.
c
Press Stop/Exit.
Troubleshooting and routine maintenance

Reset

C
The following reset functions are available:
1 Network
You can reset the print server back to its
default factory settings such as the
password and IP address information.
2 All Settings
You can reset all the machine settings
back to the settings that were set at the
1
.
factory.
Brother strongly recommends you use this
operation when you dispose of the
machine.
Note
Unplug the interface cable when you reset
All Settings.

How to reset

a
Press Menu, 1, 8.
b
Press a or b to choose 1.Network or
2.All Settings.
Press OK.
c
Press a or b to choose 1.Reset or
2.Exit.
Press OK.
d
If you chose 1.Reset in step c, you
will be asked to reboot the machine.
Press a or b to choose 1.Yes or 2.No.
Press OK.
If you choose 1.Yes, the machine will
begin the Restart.
Note
You can also reset the Network settings
by pressing Menu, 5, 0.
C
C
C
101