Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Stanley STDC12
Summary of Contents for Stanley STDC12
- Page 1 STDC12 STDC12KB STDC18 English Page 3 STDC18KB...
- Page 2 ENGLISH (Original instructions)
- Page 3 ENGLISH (Original instructions) Fig. A Fig. B Fig. C Fig. D Fig. E Fig. F...
- Page 4 ENGLISH (Original instructions)
-
Page 5: Intended Use
Intended use cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of Your STANLEY drill/screwdriver STDC12HBK,STDC18HBK electric shock. has been designed for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. - Page 6 ENGLISH (Original instructions) g. If devices are provided for the connection of dust b. Use power tools only with specifically designated extraction and collection facilities, ensure these are battery packs. Use of any other battery packs may connected and properly used. Use of dust collection create a risk of injury and fire.
-
Page 7: Residual Risks
When assessing vibration exposure to determine safety measures required by 2002/44/EC to protect persons • Use your STANLEY charger only to charge the battery in regularly using power tools in employment, an estimation of the tool with which it was supplied. Other batteries could vibration exposure should consider, the actual conditions of burst, causing personal injury and damage. -
Page 8: Electrical Safety
If the supply cord is damaged, it must be replaced by the • Lock the tool by setting the forward/reverse slider (2) to manufacturer or an authorised STANLEY Service Centre the centre position. in order to avoid a hazard. •... - Page 9 ENGLISH (Original instructions) • Tighten an Allen key into the chuck and strike it with a • Plug in the charger. hammer as shown. • Switch on at the mains. • Remove the Allen key. After normal use, a charging time of 3 hours will provide •...
-
Page 10: Maintenance
ENGLISH (Original instructions) If the clutch ratchets before the desired • Use HSS drill bits when drilling in metal. result is achieved, increase the collar • Use masonry bits when drilling in soft masonry. setting and continue tightening the screw. Repeat until you reach the correct setting. -
Page 11: Protecting The Environment
Type NiMH NiMH Should you find one day that your Stanley product needs replacement, or if it is of no further use to you, do not Weight dispose of it with household waste. Make this product available for separate collection. -
Page 12: Service Information
STANLEY location nearest you. One years full warranty If your STANLEY product becomes defective due to faulty materials or workmanship within 12 months from the date of purchase, STANLEY guarantees to replace all defective parts free of charge or –... - Page 13 90623045 01/2015...
- Page 14 Ebrahim Al Zayani, Opposite to Al Fouzan, Jeddah highway or King Abdul Aziz road, Yanbu. Tel: (966-4) 3960980, Fax: (966-4) 3961980. Mohamed Ahmed Bin Afif Est., P.O. Box 530, Yanbu, Al Bahr, Tel: (966-4) 3222626/ 3228867, Fax: (966-4) 3222210. SOUTH AFRICA: Stanley Black & Decker - RSA, 199 Winze Drive Stormill Ext 9 Roodepoort, Tel: (2711) 472 0454, Fax: (2711) 472 0482.
Need help?
Do you have a question about the STDC12 and is the answer not in the manual?
Questions and answers