Table of Contents
Advertisement
Operation
Factory Reset
Resetting the Temperature Cutoff Switch
Should the heater overheat, a manual limit cut-out will turn the unit off and it will not come back on without being
reset. If the
button on the unit is pressed, Err 1 will be displayed on the unit. It can be reset by turning the unit off
at the main disconnect panel and waiting 5 minutes before turning the unit back on.
CAUTION: If you need to continuously reset the heater, turn the unit off at the main disconnect panel and call
technical support at: 1-888-346-7539.
18
Press and hold
and
factory default. This action will also disconnect the unit from the Wi-F network if
connected. This action must be performed on the hidden touch controls.
at the same time for 3 seconds to reset all the settings to
www.dimplex.com
Advertisement
Table of Contents
Need help?
Do you have a question about the MULTI-FIRE SL PLF3614-XS and is the answer not in the manual?
Questions and answers