IMPORTANT ASSEMBLY INFORMATION
Tools required for assembling the bench: two adjustable wrenches and Allen wrenches.
❖
NOTE: it is strongly recommended that this equipment is assembled by two or more
❖
people to avoid possible injury.
Ensure carriage bolts are inserted through the SQUARE holes on components that need to
❖
be assembled. Attach washer only to end of the carriage colt.
Use Allen bolts or hex. bolts inserted through the ROUND hole on components that need to
❖
be assembled.
❖
Always wait until all bolts are assembled onto the bench before tightening the bolts. Do not
tighten each bolt right after it is installed
Fasten Nuts and Bolts
Securely tighten all nuts and bolts after all components
have been assembled in current and previous steps.
NOTE: do not over tighten any component with pivoting
function.
Make sure all pivoting components are able to move freely.
Do not tighten all nuts and bolts in this step.
5
www.puretecfitness.com