Wire Color Symbols; Fastener Information - Suzuki GRAND VITARA 2005 Manual

Wire Color Symbols

Symbol
B BLK
Bl BLU
Br BRN
G GRN
Gr GRY
Lbl LT BLU
Lg LT GRN
O, Or ORN
R RED
W WHT
Y YEL
P PNK
V PPL

Fastener Information

Metric Fasteners
Most of the fasteners used for this vehicle are JIS-defined and ISO-defined metric fasteners. When replacing any
fasteners, it is most important that replacement fasteners be the correct diameter, thread pitch and strength.
CAUTION
!
Even when the nominal diameter (1) of thread is the same, the thread pitch (2) or the width across flats
(3) may vary between ISO and JIS. Refer to JIS-TO-ISO Main Fasteners Comparison Table below for the
difference.
Installing a mismatched bolt or nut will cause damage to the thread.
Before installing, check the thread pitch for correct matching and then tighten it by hand temporarily. If
it is tight, recheck the thread pitch.
JIS-TO-ISO Main Fasteners Comparison Table
Thread pitch
JIS
Width across flats
Thread pitch
ISO
Width across flats
S6JB0A0101003
Wire Color
Black
Blue
Brown
Green
Gray
Light blue
Light green
Orange
Red
White
Yellow
Pink
Violet (Purple)
Nominal diameter
M6 M8 M10 M12 M14
1.0 1.25 1.25 1.25 1.5
10 12 14 17 19
1.0 1.25 1.5 1.5 1.5
10 13 16 18 21
There are two kinds of colored wire used in this vehicle.
One is single-colored wire and the other is dual-colored
(striped) wire. As the color symbol, the single-colored
wire uses only one, three or five alphabets (i.e. "G" or
"GRN"); the dual-colored wire uses two color symbols
combination (i.e. "G/Y" or "GRN/YEL"). The first symbol
represents the base color of the wire ("G" or "GRN" in
the figure) and the second symbol represents the color
of the stripe ("Y" or "YEL" in the figure).
I4RH0A010005-01
General Information:
I1SQ01010037-01
S6JB0A0101004
0A-3