Table of Contents
Advertisement
Tarp Removal
Place the tonneau on a clean, at surface and nish detaching the cover from the side rails and corners.
4
Repeat the procedure for the other side.
Remove one side of the frame. To do this you will need the 3/16" Hex wrench. Loosen but do not remove
5
the fastener from the tail rail.
The side rail should now slide out of the corners and bows. Repeat the procedure on the other side.
6
CAB RAIL
TAIL RAIL
Advertisement
Table of Contents
Need help?
Do you have a question about the Trifecta 2.0 and is the answer not in the manual?
Questions and answers
How do I temporarily remove the cover out of the way so I can use the full truck bed?
To temporarily remove the Extang Trifecta 2.0 cover, pull down each EZ-Lock clamp at the tailgate, fold the cover twice, and buckle it to the cab. If full removal is needed, the entire cover can be easily taken off in minutes without special tools.
This answer is automatically generated