Chopin SDmatic User Manual page 69

User's manual 
12/2016
SDmatic
■ SDmatic parameters and calibration units can be set in the
calibration menu.
■ Some functions are protected by a code: they can only be used
by Chopin entitled agents.
■ Parameters that can be set by the user are the following:
- language selection,
- results printing modification,
- measurements units selection,
- vibrator's intensity adjustment,
- user calibration.
■ Language selection
❏ The language can be chosen among 8 different languages.
❏ Press on the icon corresponding to language selection (map of
the world).
❏ Press on the desired language.
❏ Validate by pressing on "OK".
If you want to leave this screen without validating the language
selection, press on the icon "Exit".
Language selection
GB
69