30Mp Multi-Chiller Overview And Specifications; What Is The 30Mp Multi-Chiller Application - Carrier 30MP Installation And Startup Manual

30MP Multi-chiller overview and specifications

What is the 30MP Multi-chiller application?

The 30MP Multi-chiller is a special purpose application used to control from two to eight 30MP chillers as a single
large chiller, which is operated from the AppController. Each 30MP chiller must be equipped with the 30MP UPC
Open interface. The 30MP Multi-chiller application operates each individual chiller in the most efficient manner by
staging the machines independently. As a system, it reduces the Kw/ton energy consumption at part load
operating conditions. The 30MP Multi-chiller application can run in 100% stand-alone mode or communicate to an
i-Vu® Control System.
30MP Multi-chiller
Installation and Start-up Guide
1
CARRIER CORPORATION ©2018
All rights reserved