Download Print this page

Sharp FP-JC2 Operation Manual page 6

Advertisement

IMPORTANT SAFETY INSTRUCTIONS
• Do not use items of silicone-based products* near the unit.
The inside of the unit has insulation with fluoresin, silicon, and similar
materials that can cause the air purifier to not emit Plasmacluster ions.
FP-JC2.indd
4
WARNING
• If the accessory socket is integrated into the ashtray, be sure that cigarettes
are completely extinguished before using the unit.
• When leaving the vehicle, unplug the car adapter and close the ashtray's lid.
(Failure to do so could lead to fire caused by the smoldering cigarettes.)
Caution
• Do not attach or wire in a place that may interfere with the operation of the
car's air bags,(as doing so can cause a traffic accident or injury.)Air bag
activation can cause the unit and other objects to fly about the cabin.
• Do not touch the metal parts of the car adapter's car adapter (or of the
accessory socket).(The metal parts of the car adapter could be hot directly
after the car is stopped, and could cause burns if touched.)
• Make sure that accessory attachment belt is not loose and secured tightly
in place.(A loose belt can become detached or fall off during operation and
cause injury or accident. )
• Do not operate the air purifier without the filter attached.
(Without the filter, the air purifier will not filter air and may also malfunction.)
• Move the unit out of the car when using room fumigating type insecticides
or deodorizers. If not, the chemicals could get inside the unit and later be
ejected from the air outlet, possibly harming your health.
• If the unit risks falling out (when driving on rough roads,over bumps, etc.),
either slow down or remove the unit beforehand. (Failure to do so could
cause injury or damage to the unit.)
• When attaching the unit, only use the accessory attachment belt,(as failing
to do so can cause accident or injury.)Before operating the unit, make
sure that the unit is properly secure and that the attachment belt is not
loose,(otherwise the unit may come loose or fall off and cause a traffic
accident or injury.)
The fluororesin or silicone could get stuck inside the unit, preventing it from
producing Plasmacluster ions.
If this happens, remove the dust from the electrode section of the
Plasmacluster Ion Generating Unit.
* Hair care products (split end coatings, hair mousses, hair treatments, etc.),
cosmetics, antiperspirants, antistatic agents, waterproofing sprays, polishes,
glass cleaners, chemicalimpregnated clothes, wax, etc.
To reduce the risk of electric shock, fire or injury :
To reduce the risk of electric shock, fire or injury :
E-4
2018/06/28
11:35:16

Advertisement

loading