Advertisement
PREPARATION
Attaching to the seatback (cont)
8
9
FP-JC2.indd
10
• Be sure to remove any dirt, from the accessory socket
• Use the car adapter designed exclusively for this unit,and insert
NOTE
the car adapter securely all the way in until it stops. (If the car
adapter is not inserted securely until it stops, it could heat up,
deforming the accessory socket, and this could lead to fire.)
• Do not pull on the cord when unplugging the car adapter
(Doing so could damagethe cord,
Leading to fire or electric shock.)
• When using, connect with the selector
switch set to "N", and if the plug is loose,
connect with the switch set to "W".
(The width between electrodes (the metal parts)
differs at the N and W positions.)
• Do not use the unit in large trucks, buses
or other vehicles with 24V batteries.
(Doing so could lead to fire or electric shock.)
Wiring of the adapter cable
Use cable clip to fix the cable if needed.
• Clean the place where you want to the clips beforehand.
NOTE
• Do not touch or reinstall the joining surface of the clip.
• Clips will peel off if installed on a corrugated surface.
• Do not install on movable parts such as seat rails or shift lever.
• Do not install in places which may influence safety sach as air
bags, consider an appropriate place for installation.
• Consider the front/back movement of seats and reclining.
• Do not fold the cable or put pressure on it.
Insert the car adapter into the
accessory socket.
E-10
Hook
W
W
N
N
Cable Clip
2018/06/28
11:35:36
Advertisement
