Memory Card - Spypoint CELL-LINK User Manual

Memory Card

INSTALLING A MICROSD CARD (NOT INCLUDED)
A memory card is necessary to save the photos and videos that the camera transmits to the CELL-LINK.
When your camera is connected to the CELL-LINK, the photos and videos taken by the camera will be saved
in their original format (defined by your camera) on the microSD card of the CELL-LINK. Your precious
files are therefore stored on the CELL-LINK's microSD card. At any time, you can directly retrieve them by
removing the SD card and transferring the content to another device.
Your device requires a memory card type microSD, with a maximum capacity of 32 GB, sold separately.
Here is a table showing the approximate quantity of photos that can be recorded on the card, according
to different memory card capacities.
MEMORY
4 GB
PHOTOS 10 MPX
1 600
INSERTING YOUR MICROSD CARD
Before inserting the microSD card into your device, it must be formatted via a computer to ensure
proper operations. Visit www.spypoint.com/en/support if you need help formatting your microSD card.
• Open the CELL-LINK battery compartment door.
• Make sure the device is turned OFF.
• Insert the microSD card in the slot for microSD cards, the metal contacts facing the bottom (as shown).
• The card is inserted correctly when a click is heard.
REMOVING YOUR MICROSD CARD
• Before removing a memory card, always turn your device OFF to prevent files from on the card from being
deleted or damaged.
• To remove the card, push it lightly into the device until you hear a click. Then take it out of the device.
8 GB 16 GB
3 200 6 300
NOTE
The CELL-LINK is equipped with continuous file
recording. This means that when the memory card
is full, the device continues to save your pictures
by erasing the first recorded files.
32 GB
12 600
SPYPOINT
CELL-LINK
8