Power Supply - Spypoint CELL-LINK User Manual

Power Supply

SELECT A POWER SOURCE
3 options are available to you:
• 8 lithium or alkaline AA batteries
• 12 V rechargeable battery (#KIT-12V, sold separately)
• 3.7 V rechargeable battery pack (#LIT-10, sold separately)
NOTE
We recommend using the SPYPOINT #LIT-10 rechargeable lithium battery pack,
sold separately. It provides a long charge time, more than double that of AA
batteries.
FOR BEST RESULTS AND NO LEAKAGE
• Use only new alkaline or lithium batteries.
• Do not mix new and old batteries.
• Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
• Unlock and open the CELL-LINK door.
• Eject the battery holder by pushing the latch
(1) forward and pressing down on the battery
holder (2). The battery holder will be unlocked
and you will be able to remove it.
• Insert 8 AA batteries following the (+) and (-)
polarity indicators.
• Place the battery holder back into the battery
compartment, an audible click should be heard.
AN EXTERNAL 12 V BATTERY
• The device was designed to recognize
and use an optional power source
other than the 8 AA batteries.
• You can purchase a 12 V cable
and battery kit (like the #KIT12V,
sold separately). Simply plug the
12 V cable into the 12 V jack of
the device and connect the
other cable end to the 12 V battery.
MANAGING VARIOUS DEVICE POWER SUPPLY
If you choose to plug an external 12 V battery (#KIT-12V, sold separately)
into your device, it becomes your device's new primary power source.
The AA batteries will only be used once the 12 V battery is depleted.
You can check the battery level of your device:
• In the application: on the home page, you will see the battery charge level
for each of your devices. You can access more details on the STATUS of your
battery by going to the STATUS page. When the battery logo turns red, we
suggest that you change the batteries before it is completely drained.
• On the device: as soon as the device is switched on, when the STATUS light
flashes orange, it indicates that the battery level is low.
SPYPOINT
CELL-LINK
7