Spypoint CELL-LINK User Manual page 5

Components
CABLE WITH SD ADAPTER (#CL-CBL)
Links the CELL-LINK to your camera to allow file transfer from one to
the other.
SLOT FOR MOUNTING STRAP
Allows the device to be installed using the included installation strap.
CABLE LOCK HOLE
Allows you to install a #CLM-6FT padlock cable to secure the unit
(sold separately).
SIGNAL LIGHTS (5)
During the installation, these 5 lights indicate to the user the strength
of the cellular signal.
SIM CARD SLOT
Space to insert a SIM card. It is necessary to activate cellular functions.
The SIM card, pre-installed and pre-activated, is included with the device.
It is important to use a SPYPOINT SIM card (supplied by SPYPOINT),
otherwise the cellular functions of the device will be inoperative.
LATCH TO HOLD/RELEASE THE BATTERY COMPARTMENT
Holds the battery compartment in place when inserted. Slide the latch
and hold it in the open position to remove the battery compartment.
BATTERY COMPARTMENT
Space to insert the battery holder.
AA BATTERY HOLDER
Removable device in which the 8 AA batteries are inserted
(not included with the device).
STATUT LIGHT
During installation, it flashes to indicate to the user the strength of the
cellular signal. During regular operation, it indicates that the device is
recording or transferring files.
ON/OFF SWITCH
Allows the user to turn the device ON/OFF.
MICROSD CARD SLOT
Space to insert the microSD card (not included) needed to save photos.
SCREW-THREAD FOR STANDARD ¼''-20 TRIPOD MOUNT
Allows you to attach a standard tripod from ¼''-20.
ANTENNA
Captures the cellular signal.
PORT FOR CABLE WITH SD ADAPTER
Allows you to connect and secure the cable with SD adapter (the end
of the cable ends in a mini USB port).
12 V JACK
Allows you to insert a power cord connected to an external 12 V source.
LOCKING LATCH
Allows you to lock and open the door.
SPYPOINT
CELL-LINK
5