Spypoint CELL-LINK User Manual page 12

Starting Your Device
STARTING THE CELL-LINK
1
All the lights turn on for
3 seconds.
2
or
2 possibilities:
The 1 red signal LED flashes =
st
low batteries.
The STATUS light stays on
+ 5 LED flashing = searching for
cellular signal. This can take a few
minutes.
(CONTINUATION)
3
or
2 possibilities after the cellular
signal search:
Only the red LED is flashing =
network issue.
The STATUS light is flashing and
X LED are fixed = indicates the
strength of the signal.
Good to
+ + (1-3)
excellent signal
Weak signal
+
Insufficient
signal
The process lasts 30 s, after which
the CELL-LINK is operational.
SPYPOINT
NOTE
Inside your device's door is a small checklist
to guide you through the different steps to start
your device.
CELL-LINK IN FONCTION
4
All lights turn off. While the CELL-LINK
is in function,
the STATUS light
is turned on and
fixed.
CELL-LINK
5
12