Download Print this page

Front Runner LATP003 Installation Instructions Manual

Toyota land cruiser prado 250 lexus gx550 2024-current ladder

Advertisement

Quick Links

front runner
Thank you for purchasing a Front Runner Toyota Land Cruiser Prado 250 / Lexus GX550 (2024-Current) Ladder.
Before you start, take a moment to familiarize yourself with the Fitting Instructions and the included components.
IT IS CRITICAL THAT ALL FRONT RUNNER PRODUCTS BE PROPERLY AND SECURELY ASSEMBLED AND ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD
RESULT IN AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH. YOU ARE RESPONSIBLE FOR ASSEMBLING AND SECURING ALL FRONT
RUNNER PRODUCTS TO YOUR VEHICLE, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR AND
DAMAGE. THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND PRECAUTIONS SUPPLIED WITH YOUR FRONT RUNNER PRODUCT PRIOR TO
INSTALLATION OR USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY
FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL.
NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
LATP003_REV_A00
Toyota Land Cruiser Prado 250
Lexus GX550
(2024-Current) Ladder
READ ME !
Refer to Page 2 for a list of all the components, quantities and tools required.
IMPORTANT WARNING!
Please call us if you have any questions about the installation of this product.
1
LATP003
© 2024 FRONT RUNNER VEHICLE OUTFITTERS
ENG

Advertisement

loading
Need help?

Need help?

Do you have a question about the LATP003 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Front Runner LATP003

  • Page 1 FAMILIAR WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER OR OTHER QUALIFIED PERSONNEL. NOTE: Front Runner will not be responsible for any damage caused by the failure to install the product according to these instructions.
  • Page 2: Tools Needed

    Masking Tool Marker 13mm Tape Lower Mount Plate M6 x 20 Countersunk Cap Screw 14 X M6 Nyloc Nut Denatured Heat Gun Alcohol Torque Wrench Pinch Weld (210mm Long) (Cold Climate) FIGURE 1.1 LATP003_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 3 Head Bolts, M6 Nyloc Nuts & M6 x 25 Thread Forming Screws (Items 20, 18 & 21). 10mm Fully Tighten all Fasteners. Tightening Torque: Torx M6 : 8-10Nm / 5.9 ft lb - 7.38 ft lb LATP003_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 4 Remove the Ladder assembly and the Bottom Clamp before drilling 4mm pilot holes on the two markings. Open the holes to 7mm. Unclip the plastic door handle. LATP003_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 5 M6 x 12 Hex Bolts and M6 Nyloc Nuts (Items 24 & 18) as show. Tighten all Fasteners. Place Nut Caps (Items (13 & 22). Tightening Torque: M6 : 8-10Nm / 5.9 ft lb - 7.38 ft lb LATP003_REV_A00 © 2024 FRONT RUNNER VEHICLE OUTFITTERS...
  • Page 6 Congratulations! You did it. Take a step back and admire your work! INSTALL OTHER VEHICLE AND RACK ACCESSORIES Now's the time to visit your favorite Front Runner Dealer in person or online. Be sure to tag us. We love to see our gear in action! #FrontRunnerOutfitters #BornToRoam...