Table of Contents
Advertisement
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section
Application and Description
Control Panels Supported
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Application and Description
The Ademco 4286 Vista Interactive Phone (VIP) Module is an add-on acces-
sory that can be used with certain Ademco controls* to provide an interactive
phone capability to the security system. This feature will permit access to the
security system via any Touch-tone phone (either on premises or by a call-in
when away from the premises).
Only one 4286 VIP Module can be used in a system.
1. The 4286 VIP Module can only be used with systems using address-
2. For controls that do not support addressable keypads (such as the
All controls that support a 4285 Voice Module can support the 4286 VIP Module
as well. Existing 4285 Voice Module programming and downloading fields for the
control panel still apply.
General Description
Differences between the 4285 and 4286 VIP Module
4286 VIP Module Specifications
able keypads. Addressable keypads that may be used are: 4137AD,
5137AD, 6128, 6137, 6138, and 6139.
VISTA-10(SE), VISTA-20 (all models), and VIA-30P(SE), an address-
able keypad must still be used and set to the non-addressable mode.
The non-addressable mode, for units with DIP switches all toggled to
the UP position, is address 31.
•
See the control's Installation Instructions for information on
whether the control can support a VIP Module
S E C T I O N
1
1-1
Advertisement
Table of Contents
