Table of Contents
Advertisement
4286 VIP Module Installation and Setup Guide
A list of confirmation sounds and voice announcements that follow successful
command entries is provided below.
Confirmation Sounds & Voice Announcements After Command Entries
Command Function
Performed
Armed AWAY
Armed MAXIMUM
Armed STAY
Armed INSTANT
Disarmed
Zone Bypass
Enter CHIME mode
Enter/Erase temporary User
code*
† If desired, you may exit during the Exit Delay period.
* This function cannot be performed via the telephone with some controls;
check the control's Installation Instructions.
For those commands where the 4286 VIP Module's vocabulary does not pro-
vide annunciation, (for example TEST, etc.), a beep will be heard (if appropri-
ate) following a successful entry and the words "SEE SYSTEM KEYPAD"
will be annunciated.
Turning Remote Phone Access On and Off
Remote telephone access to the security system can be toggled on and off via
an on-premises phone (or via a wired keypad) by keying the following:
4-digit Master security code +
The synthesized voice response will be: "CALL-IN TO SYSTEM [ON] or
[OFF]", with 2 beeps when turned ON, and 1 beep when turned OFF.
Some systems will not give voice responses, but will give the beeps.
4-4
Telephone Confirmation
Sound
Synthesized Voice Announcement
"ARMED AWAY, EXIT NOW" †
2 beeps
"ARMED MAX, EXIT NOW" †
2 beeps
"ARMED STAY, EXIT NOW" †
3 beeps
"ARMED INSTANT, EXIT NOW" †
3 beeps
1 beep
"DISARMED, (NOT) READY TO ARM"
1 beep
"BYPASS, (descriptor), ZONE #
1 beep
"CHIME (ON) or (OFF)"
1 beep
No synthesized voice announcement
#
+
9
+
1
Advertisement
Table of Contents
