Table of Contents
Advertisement
4286 VIP Module Installation and Setup Guide
If the code is not accepted, there will be no system status report heard. The
control may have been active (such as a keypad sounding, active dialer or
commands entered at the keypad). Hang up the handset and wait at least 1
minute and repeat the above procedure. If this does not work, re-check the
programming in the control panel for the phone code and device program-
ming.
If the phone code is ever changed in the control panel either through keypad
programming or by download, the phone code must be set again using the
above procedure.
Phone Access When On-Premises
Pick up the phone and enter the programmed phone code. Annunciation of
a system status report will automatically start.
If the system is in alarm when the phone code is entered, a voice prompt will
ask for entry of the system security code ("ENTER SYSTEM CODE
NOW")*.
*In some systems, there will not be a voice prompt to enter the system code.
If no prompt is given, key an OFF sequence (system code plus OFF) during,
or just after the status report to turn alarm off.
To perform system commands, see "TYPICAL TELEPHONE KEYPAD
SHOWING EQUIVALENT COMMAND FUNCTIONS" below.
In most systems, the alarm will shut off and a system status report will
automatically start.
Phone Access When Off-Premises
1. Dial the premises phone number.
•
•
Do NOT enter the code after the machine starts recording.
•
2. When you have entered the 2-digit phone code, a voice prompt will
ask for entry of the 4-digit security code, "ENTER SYSTEM CODE
NOW".
4-2
If the system replies directly (even if the system is in alarm), 2 long tones will be heard,
followed by a voice prompt "HELLO, ENTER PHONE CODE NOW". Enter the 2-
digit phone code.
If the answering machine replies, enter the 2-digit phone code during a pause at the be-
ginning of, or during, the outgoing message.
If a person answers, tell that person to hold. Enter the 2-digit phone code within the first
20 seconds of the pick-up.
Advertisement
Table of Contents
