Install Menu; Adjustment Procedure Dc-Iris Lens - Bosch NWC-0495-20P Operating Instructions Manual

28 en | Quick set-up
–
–
–
–
4.2.2

Install menu

Function Selection
Lens Wizard Select submenu
Network Select submenu
Exit
Install lens wizard submenu
Function Selection
Lens Type AUTO, MANUAL,
DCIRIS, VIDEO
Detected
Set Back
Focus Now
Set LVL
Exit
4.3

Adjustment procedure DC-iris Lens

1.
2.
3.
V 2.5 | 2007.6
Use the up or down keys to scroll up or down through a
menu.
Use the left or right keys to move through options or to set
parameters.
When in a menu, quickly pressing the menu/select key
twice restores the selected item to its factory default.
To close all menus at once from any menu, select the Exit
item and hold down the menu/select key until the menu
display disappears.
Description
Select to optimize camera lens combination
Select to set the network IP address for the cam-
era (default address is 192.168.0.1)
Exit the menu
Description
In AUTO mode the camera auto detects the type of
lens used or force the camera into a mode.
If the LENS TYPE detection is in AUTO, the
detected lens type is shown.
Select to force lens to its maximum opening. After
focusing the lens the object of interest remains in
focus in bright and low light conditions.
(Video iris lenses only). The level detector indica-
tor must be set to the center by adjusting the level
potentiometer on the lens, to obtain the best pic-
ture performance.
Return to the INSTALL menu
Unlock the back focus locking button.
Access the Lens Wizard menu.
Set Back Focus Now is highlighted in the menu.
Operating Instructions
Dinion IP
Bosch Security Systems