Advertisement
Quick Links
Advertisement
Related Manuals for Bosch NEC-070V09-21W
Summary of Contents for Bosch NEC-070V09-21W
- Page 1 EX7‑IP Ceiling-Mounted No- Grip IP Camera EX7-IP Installation Manual...
-
Page 3: Important Safety Instructions
Damage requiring service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel when any damage to the equipment has occurred, such as: - the power supply cord or plug is damaged; Bosch Security Systems Quick Install | en 1 MAN7IPB Rev.0 | 2008.10... - Page 4 Attachments, changes, or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
- Page 5 The full version Installation Manual is available on the enclosed CD-ROM and can be viewed and printed out with Acrobat Reader, which is also on the enclosed CD-ROM. This user guide is the intellectual property of BOSCH Security Systems and is protected by copyright CAUTION! –...
-
Page 6: Initial Preparations
If any adjustment needed, it is advisable to check the camera’s operation before installation 4.) Install IP Camera Software on PC. MAN7IPB Rev.0 | 2008.10 (items supplied with unit) Quick Install EX7-IP Bosch Security Systems... -
Page 7: Mounting The Unit
CAUTION! Ensure the selected location is protected from falling objects, accidental contact with moving objects and unintentional interference from personnel. Follow all applicable building codes. Bosch Security Systems Quick Install | en 5 MAN7IPB Rev.0 | 2008.10... - Page 8 2.2.5.) Mount the camera housing to the electrical box and MAN7IPB Rev.0 | 2008.10 connector. See figure below on page 7. through the foam gasket at the bottom of the camera chassis. RJ45 cable to the PC/laptop computer. ceiling as shown below. Quick Install EX7-IP Bosch Security Systems...
- Page 9 EX7-IP | en 7 RJ45 mating connector 2.3) Camera chassis mounting Bosch Security Systems Quick Install MAN7IPB Rev.0 | 2008.10...
- Page 10 2.) Connect the camera to the PC/laptop and power up the camera. Follow the prompts. See section 2 of full version Installation Manual available on the enclosed CD-ROM for more detail. 3.) Launch Configuration Manager or web-browser. MAN7IPB Rev.0 | 2008.10 Lens adjustment Quick Install EX7-IP Tilt adjustment Bosch Security Systems...
- Page 11 3.) The set screw marked T←→ W is used for telephoto or wide- angle settings. 4.) Re-tighten the set screws after focus adjustments have been com- pleted. 5.) Locate the “Auto-Iris” adjustment controls. Bosch Security Systems Quick Install | en 9 MAN7IPB Rev.0 | 2008.10...
- Page 12 Using a Infra-Red Pass filter will ensure the iris is fully open for cor- rect setup and adjustment. Note that statement above is applicable only for Day/Night or IR version cameras. MAN7IPB Rev.0 | 2008.10 Quick Install EX7-IP Bosch Security Systems...
- Page 14 Lancaster, Pennsylvania 17601 Telephone +1 888-289-0096 +1 585-223-9180 Email: security.sales@us.bosch.com www.boschsecurity.us © Bosch Security Systems, Inc. 2009; Data subject to change without notice. Europe, Middle East, Africa: Bosch Security Systems B.V. P.O. Box 80002 5600 JB Eindhoven, The Netherlands Phone: + 31 40 2577 284 Fax: +31 40 2577 330 emea.securitysystems@bosch.com...
Need help?
Do you have a question about the NEC-070V09-21W and is the answer not in the manual?
Questions and answers