Basic Mode; Basic Mode Menu Tree - Bosch NTC-255-PI Installation And Operation Manual

IP Camera 200 Series
5

Basic Mode

5.1

Basic Mode menu tree

The basic mode configuration menu allows a set of basic
camera parameters to be configured.
Basic Mode
>
>
>
>
>
>
>
To view the current settings:
1.
2.
The settings are changed by entering new values or by selecting
a pre-defined value in a list field.
Saving changes
After making changes in a window, click Set to send the new
settings to the device and save them there.
Clicking Set saves only the settings in the current window.
Changes in any other windows are ignored.
Click SETTINGS in the applications title bar to close the
window without saving the changes.
Note:
When entering names do not use any special characters, for
example &. Special characters are not supported by the internal
recording management system.
Bosch Security Systems
Device Access
Date/Time
Network
Encoder
Audio
Recording
System Overview
If necessary, click the Basic Mode menu to expand it. The
sub-menus are displayed.
Click a sub-menu. The corresponding page is opened.
Installation and Operation Manual
Basic Mode | en
AR18-10-B012 | v1.5 | 2011.01
29