Displaying The Alarm Image Window; Starting Manual Recording; Starting A Pre-Configured Camera Sequence - Bosch LTC-1311-20 Operator's Manual

Bosch Video Management System
2.
5.4

Displaying the Alarm Image window

Main window
You can switch from the Image window to the Alarm Image window if at least one alarm is in
the Alarm List.
NOTICE!
A map displayed in an Alarm Image pane is optimized for display and contains only the initial
view of the basic .dwf file.
To display the Alarm Image window:

To display the Image window again:

5.5

Starting manual recording

Main window
You can start recording for each camera manually. The quality level of alarm recording mode is
used. The duration of alarm recording is configured in the Configuration Client.
If the selected camera is already recording, the quality level is changed to alarm recording
mode. The alarm recording can be protected when NVR recording is used. With VRM
recording, the alarm recording is not protected.
Note: You cannot start manual recording for a DiBos camera.
To start recording:
1.
2.
Notes:
NVR recordings only: The icon in the Image pane bar changes to
If you do not click to stop recording, manual recording stops after the configured manual
recording time. In the Timeline of the camera, the manual recording is displayed as alarm
recording.
VRM recordings only: You cannot manually stop recording. The recording stops after the
configured alarm recording time. In the Timeline of the camera, the pre-alarm recording is
displayed as alarm recording, if pre-alarm recording is configured in Configuration Client.
5.6

Starting a pre-configured camera sequence

Main window
With a camera sequence, a group of cameras are displayed one after the other. The pre-
configured camera sequences are configured in the Configuration Client and appear in the
Logical Tree.
Bosch Sicherheitssysteme GmbH
Drag the corner to resize the Image pane.
In an Image window, click
The Alarm Image window is displayed.
In an Image window, click
Live Mode or Playback Mode is displayed depending on the Mode that was displayed
before.
Select an Image pane displaying a camera.
Click .
Recording is started.
Operator's Manual
.
.
Displaying camera images | en
. Click to stop recording.
Operator Client | V3 | 2010.07
13