Displaying The Live Image Window; Starting A Workflow; Un-Accepting An Alarm - Bosch LTC-1311-20 Operator's Manual

32 en | Handling alarms
To change the column width:


9.5

Displaying the Live Image window

Main window >
or
Main window >
You can switch to the Live or Playback Image window when the Alarm Image window is
displayed.
To display the Image window:

9.6

Starting a workflow

Main window >
or
Main window >
To start a workflow:
1.
2.
3.
9.7

Un-accepting an alarm

Main window >
or
Main window >
When you recall the acceptance of an alarm, it returns to Active state in your Alarm List, and it
reappears in the Alarm Lists of all users that originally received the alarm.
To "un-accept" an alarm:

Operator Client | V3 | 2010.07
Point to the right border of the column heading. The pointer becomes a double-headed
arrow . Drag the column border to the left or the right.
or
To quickly make the column wide enough to show all of its contents, double-click the
right border of the column heading.
> Alarm Image window
> Alarm Image window
In an Alarm Image window,
click . The Image window is displayed.
>
>
Select the required alarm entry and click
If this alarm has been configured to force a workflow, the action plan is displayed (if
configured for this alarm). Additionally you can enter a comment if this is configured.
Perform the required actions.
Clear the alarm.
>
>
Select the accepted alarm entry
and click .
The alarm is displayed as active again.
Operator's Manual
tab
tab
.
tab
tab
Bosch Video Management System
Bosch Sicherheitssysteme GmbH