Set Your Country (For Australia / New Zealand Customer Only); Setting The Date And Time - Brother MFC-7450 Quick Setup Manual

STEP 1
Setting Up the Machine
4 Set Your Country
(For Australia / New Zealand
Customer Only)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by plugging
in the power cord and turn the power switch on.
Press OK.
Set Country
Press OK Key
2
Press
(Australia, or New Zealand).
Australia
Select ab or OK
3
Press OK when the LCD shows your country.
4
The LCD prompts you to make sure of the
country again.
Australia?
1.Yes 2.No
5
If the LCD shows the correct country, press 1
to go to step 6.
Or press 2 to go back to step 2 to choose the
country again.
6
After the LCD shows Accepted, the machine
will restart automatically. After the restart, the
LCD shows Please Wait.
8
or to choose the country
5

Setting the date and time

The machine displays the date and time, and if you
set up the station ID, the date and time displayed on
your machine will be printed on every fax you send.
1
Press Menu.
2
Press 0.
3
Press 2.
4
Enter the last two digits of the year on the dial
pad, and then press OK.
Date&Time
Year:2008
(e.g. Enter 0, 8 for 2008.)
5
Enter the two digits for the month on the dial
pad, and then press OK.
Date&Time
Month:03
(e.g. Enter 0, 3 for March.)
6
Enter the two digits for the day on the dial pad,
and then press OK.
Date&Time
Day:25
(e.g. Enter 2, 5.)
7
Enter the time in 24-hour format on the dial
pad, and then press OK.
Date&Time
Time:15:25
(e.g. Enter 1, 5, 2, 5 for 3:25 P.M.)
8
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to step 1.