Set Your Country (Not Language); Select Your Language; Installing The Ink Cartridges - Brother FAX-1840C Quick Setup Manual

Setting Up the Machine
Set Your Country
5
(Not Language)
You must set your country so that the machine works
correctly on local telecommunication lines in each
country.
1
Check that the power is turned on by
plugging in the power cord.
Press Menu/Set.
Set Country
Press Set Key
2
▲ ▼
Press or
(NORWAY, SWEDEN, FINLAND or
DENMARK). (Make sure you set your
country, not your language)
Norway
Select ▲▼ & Set
3
Press Menu/Set when the LCD shows your
country.
4
The LCD prompts you to make sure of the
country again.
Norway?
1.Yes 2.No
5
If the LCD shows the correct country, press
1 to go to Step
—OR—
Press 2 to go back to Step
country again.
6
After the LCD shows
seconds, it shows
Accepted
If you select "NORWAY" in step
LCD shows Norwegean messages.
In case you want to change the language,
go to "6. Select Your Language".

Select Your Language

6
You can change LCD language to Norwegian,
Swedish, Danish, Finnish, and English.
1
Press Menu/Set.
2
Press 0.
3
Press 0.
4
▲ ▼
Press or
then press Menu/Set.
5
Press Stop/Exit.
6
to select the country
6
.
1
to select the
for two
Accepted
Vennligst Vent.
4
, the
to select your language, and
Installing the Ink
7
Cartridges
Warning
If ink gets in your eyes wash them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows:
No Cartridge
2
Open the top cover.
3
Remove the protective parts.
Do not throw away the protective parts.
You will need them when you transport the
machine.
Top Cover