Model Designations - Teledyne 3000TB Operating Instructions Manual

Introduction
Advanced Micro-Fuel Cell for trace analysis. Standard

Insta Trace cell has rapid recovery from air to low ppm
during initial installation.
Versatile analysis over a wide range of applications.

Microprocessor based electronics: 8-bit CMOS

microprocessor with 32 kB RAM and 128 kB ROM.
Three user definable output ranges (from 0-10 ppm

through 025 % allow best match to users process and
equipment.
Air-calibration range for convenient spanning at 20.9 %.

Auto Ranging allows analyzer to automatically select the

proper preset range for a given measurement. Manual
override allows the user to lock onto a specific range of
interest.
Two adjustable concentration alarms and a system failure

alarm.
Extensive self-diagnostic testing, at startup and on

demand, with continuous power-supply monitoring.
RS-232 serial digital port for use with a computer or

other digital communication device.
Analog outputs for concentration and range

identification. (0-1 V dc standard, and isolated 4–20 mA
dc optional.)

1.4 Model Designations

3000TB:
3000TB-C:
Teledyne Analytical Instruments
Standard model.
In addition to all standard features, this
model also has separate ports for zero and
span gases, and built-in control valves.
The internal valves are entirely under the
control of the 3000TB electronics, to
automatically switch between gases in
synchronization with the analyzer's
operations.
Model 3000TB
2