U-Line FOODSAVER H-3404 Instruction Manual page 2

Figure 4
Power Button
CONTROL PANEL
1. Power Button – Press the Power Button to begin. The
power indicator, speed indicator and food indicator
lights will become illuminated. After vacuum sealing,
press Power Button to turn appliance off.
NOTE: After 12 minutes of non-use, the
appliance will turn off automatically.
2. Tray Full Indicator Light – During the vacuum sealing
process, small amounts of liquids, crumbs or food
particles can be inadvertently pulled into the Drip
Tray. (K) When excess liquid fills the Drip Tray, the unit
will turn off and the Tray Full Indicator (2) will activate.
To resume normal operation, remove the Drip Tray,
empty liquid, wash in warm soapy water or place in
top rack of dishwasher. Dry and replace Drip Tray in
trough. (See Care & Cleaning on page 5.)
3. Marinate Mode Button – A ten minute
predetermined sequence of vacuum pulse to rest
ratio allowing foods to get optimum flavor infusion in
the least amount of time. See "Marinating with Your
FoodSaver " on page 3.
®
4. Accessory Mode Button – Press to achieve best
vacuum for canisters and accessories. Push
Accessory Mode button (4) to begin vacuum
process. Motor will run until vacuum sealing process
is complete.
5. Speed Settings Button – When vacuum sealing
delicate items, press Speed Setting button (5) so
that the gentle speed indicator light is illuminated.
For more control you may press Stop/Seal Button (8)
at any time to stop vacuum and begin automatic
sealing process.
NOTE: Appliance will default to normal speed
upon pressing the Power On button or when
power has been interrupted.
PAGE 2 OF 15
FEATURES CONTINUED
Accessory
Marinate
Mode
1
3
Indicator
LEDs
Speed
Adjustable
Mode Settings
Food Settings
4 5 6
6. Adjustable Food Settings Button – For optimal
vacuuming and sealing of moist or juicy foods, press
the Adjustable Food Settings button (6) until the moist
indicator light is illuminated. Choose the dry food
setting for foods without liquid. The moist food indicator
light will flash when food sealing sensors automatically
detect any moisture or liquid in the drip tray.
(See Figure 3)
NOTE: Appliance will default to dry setting
upon pressing the Power Button or when power
has been interrupted, unless liquid is detected
in the Drip Tray. (See Care & Cleaning).
7. Cancel Button – Immediately halts the current
function opening the vacuum channel.
8. Stop/Seal Button – CrushFree™ instant seal feature.
This button has two uses:
a. Press to immediately stop the vacuum process
and begin sealing the bag. This prevents
crushing delicate items such as bread, cookies
and pastries.
b. Press to create a seal when making bags from a
FoodSaver
9. Vacuum Progress Display – Displays vacuum levels
as the bag/canister is evacuated.
10. Seal Indicator Light – Constant red light indicates
sealing process is engaged. (Flashing light indicates
error)
Stop/Seal
2
Tray Full
Indicator
Cancel
Button
7
roll.
®
8
Button
9
Vacuum
Progress
D isplay
Seal Indicator
10
0615 IH-3404