Table of Contents
Advertisement
2.2 Performance specifications
The performance specifications of the AJ65SBT-64AD are shown below.
Item
Voltage
Analog
input
Current
Digital output
I/O characteristics,
maximum resolution,
accuracy (accuracy relative
to maximum value of digital
output value)
Maximum conversion speed
Absolute maximum input
Analog input points
CC-Link station type
Communication method
Number of occupied
stations
Communication cable
Dielectric withstand voltage
Isolation system
Noise immunity
Communication
area, module
power supply
External
connection
I/O area
Applicable wire size
Applicable solderless
terminals
Module mounting screw
-10 to 10V DC (input resistance 1M)
0 to 20mA DC (input resistance 250)
16-bit signed binary (-4096 to +4095)
Analog input
range
-10 to 10V
User range
setting 1
(-10 to 10V)
Voltage
0 to 5V
1 to 5V
User range
setting 2
(0 to 5V)
0 to 20mA
4 to 20mA
Current
User range
setting 3
(0 to 20mA)
Voltage ±15 V, current ±30mA*
Between power supply/communication system batch and analog input
Between communication system terminals and all analog input terminals:
Between power supply system terminals and all analog input terminals:
Between channels: Non-isolation
By noise simulator of 500Vp-p noise voltage, 1µs noise width and 25 to
7-point 2-piece terminal block
[transmission circuit, module power supply, FG]
M3
5.2 Tightening torque: 0.59 to 0.88N m
Applicable solderless terminals: 2 max.
Direct-coupled, 18-point terminal block [analog output area]
M3
5.2 Tightening torque: 0.59 to 0.88N m
Applicable solderless terminals: 2 max.
RAV1.25-3 (conforming to JIS C 2805)
[Applicable wire size: 0.3 to 1.25mm
V2-MS3, RAP2-3SL, TGV2-3N
[Applicable wire size: 1.25 to 2.0mm
M4 screw × 0.7mm × 16mm or more
(tightening torque range: 0.78 to 1.08N m)
Can also be mounted to DIN rail
3
Specification
Accuracy
Digital
Ambient
output
temperature
0 to 55°C
-4000 to
4000
0 to
±0.4%
4000
(±16 digit*
1
)
0 to
4000
Factory setting is -10 to 10V.
1ms/channel
4 channels/module
Remote device station
Broadcast polling method
1 station
CC-Link dedicated cable
batch: 500VAC, 1 minute
Digital isolator
Photocoupler
60Hz noise frequency
0.3 to 0.75mm
2
2
]
2
]
Max.
Ambient
Resolution
temperature
25±5°C
2.5mV
1.25mV
±0.2%
1.0mV
(±8 digit*
1
)
5µA
4µA
2
Advertisement
Table of Contents
