Name Of Each Part - Mitsubishi Electric MELSEC AJ65SBT-64AD User Manual

3. NAME OF EACH PART

The name of each part in the AJ65SBT-64AD is shown.
Name and
Number
appearance
Operation
1) status
display LED
ON : Power supply on
PW LED
OFF : Power supply off
On
Normal Flashing : 0.1s intervals indicate an input range error.
mode Off
On
RUN LED Flashing : 0.1s intervals indicate that the input range
Test
mode
Off
L RUN On : Normal communication
LED Off : Communication cutoff (time expiration error)
On : Indicates that transmission speed setting or station number
setting is outside the range.
Flicker at fixed intervals
L ERR.
LED Flicker at unfixed intervals : Indicates that you forgot fitting the
Off : Indicates normal communications.
Description
: Normal operation
: 24VDC power supply shutoff or watchdog timer
error occurred.
: Indicates that the SELECT/SET switch is in the
SET position.
setting is not any of "user range settings 1 to 3".
0.5s intervals indicate that you attempted to
make offset/gain setting outside the setting
range.
: Indicates that the SELECT/SET switch is in the
SELECT or center position.
: Indicates that transmission speed
setting or station number setting was
changed from that at power-on.
termination resistor or the module or
CC-Link dedicated cable is affected
by noise.
5