Specifications - Mitsubishi Electric AJ65BT-64DAI User Manual

2. Specifications

The performance specifications of the AJ65BT-64DAV/DAI is shown below.
Item
Digital input value
Analog conversion value
I/O characteristics
Maximum resolution
Total accuracy (accuracy for
the maximum value)
Maximum conversion speed
Output short-circuit protection
Insulation system
Analog output points
Offset/gain adjustment
CC-Link station type
Communication method
Number of occupied stations
Connector terminal block
Supported cable size
Supported solderless terminal
Module installation screw
Supported DIN rail
External supply power
Noise resistance
Dielectric withstand voltage
Insulation resistor
Weight
AJ65BT-64DAV
16-bit encoded binary (valid bit: 12 bits)
-2048 to 2047
Voltage: -10 to 10 VDC
(External load resistance:2K to
1M)
Digital input Analog output
value
2000
1000
0
-1000
-2000
5mA
1% (100mV)
Max. 1ms channels (4ms per 4 channels)
Across output channels: Non-insulated
Across external supply power and analog output: Transformer insulated
Yes (user setting or factory setting)
27-point terminal block (M3.5  7screws)
RAV 1.25-3.5 (according to JIS C2805), RAV2-3.5
M4  0.7mm  16mm or larger screw
(tightening torque 0.78 to 1.18 Nm) Installable within the DIN rail.
TH35-7.5Fe, TH35-7.5AI, TH35-15Fe (conforming to JIS C 2812)
24V DC (20.4V DC to 26.4V DC)
Inrush current: 1.5A, within 0.67ms Inrush current: 3.2A, within 0.43ms
Current consumption:0.18A
(at 24VDC)
Measured using a noise simulator with 1 s of noise amplitude and 25 to
Power and communications systems batch-Analog output batch,
Power and communication systems batch-Analog output batch, 500VDC
10M or more at the insulation resistance tester
Specification
Current: 4 to 20mADC
(External load resistance:0 to
Digital input
value value
10V 4000
5V 2000
0V
-5V
-10V
Yes
4 channels per module
Remote device station
Broadcast polling method
2 stations
2
0.75 to 2.00mm
Current consumption:0.27A
Noise voltage:500V
60Hz of noise frequency.
500VAC, one minute
0.4kg
AJ65BT-64DAI
0 to 4095
600)
Analog output
value
20mA
12mA
0 4mA
4A
1% (200A)
(at 24VDC)
P-P