Installation; Preliminary Warnings; Reception - Innova 2.0 15HP Installer Manual

2�1 Preliminary warnings
For detailed information on the products, refer to
chapter "Technical information" p. 31.
The installation must be carried out by the installer. There
is a risk of water leakage, electric shock or fire if the instal-
lation is not performed correctly.
During the installation, it is necessary to observe the pre-
cautions mentioned in this manual, and on the labels
placed inside the equipment, as well as to adopt any pre-
caution suggested by common sense and by the Safety
Regulations in force in the place of installation.
Be sure to use the supplied or specified installation parts.
Use of other parts may cause the unit to come to lose,
water leakage, electrical shock, or fire.
2�2 Reception

Preliminary warnings

Upon receipt of the package check that it is not damaged,
otherwise accept the goods with reserve, producing pho-
tographic evidence of any damage.
The package must be transported in an upright position;
otherwise, notify the carrier immediately.
In the event of damage, notify the shipper within 3 days
of receipt of any damage by registered mail with return
receipt, submitting photographic evidence. Similar infor-
mation should be sent by fax to the manufacturer (juris-
diction will be at the Court Trento for any dispute).
No notice of damage will be accepted after 3 days from
delivery.
Unpack and check the contents against the packing list.
Package description
The packaging is made of suitable material and carried out
by experienced personnel.
All units are checked and tested and are delivered complete
and in perfect conditions.
The appliance is shipped in standard packaging consisting of
a cardboard sleeve and a set of expanded polystyrene pro-
tectors.

INSTALLATION

Failure to apply the indicated rules may cause malfunc-
tions of the appliances and relieves the manufacturer
from any warranty and from any damage caused to per-
sons, animals or property.
Preliminary warnings for R32
Safety checks must be carried out to ensure that the risk of
combustion is minimised before starting work on systems
containing flammable refrigerants.
The appliance must be protected against accidental im-
pacts to prevent mechanical damage.
Do not puncture or burn.
INSTALLATION
11