Subscribe to Our Youtube Channel
Related Manuals for Innova 10 HP DC
Summary of Contents for Innova 10 HP DC
- Page 1 User manual ehpocaGEO 8 - 10 On-Off 10 - 12 DC Inverter 12 DC Inverter ELEC...
- Page 2 By following the suggestions contained in this manual, the product you have purchased will operate without problems, giving you optimum room temperatures with minimum energy costs. Innova S.r.l This booklet, code N273027C - Rev. 00 - (01/17) consists of 20 pages.
- Page 3 Periodic Maintenance ..........INNOVA App operation Minimum system requirements .
-
Page 4: Warnings
USER MANUAL USER MANUAL Warnings Objects or structural obstacles (furniture, curtains, During heating mode, conditioner eliminates plants, leaves, blinds, etc.) must not obstruct the normal periodically any ice formed on the external battery. In air flow both from the internal and from the external grids. such situation, the machine keeps on working, but it does not dispense warm air to the room. -
Page 5: Description Of Operations
USER MANUAL It is possible to select the various modes by pressing the placing obstacles between the remote and the buttons (see paragraph entitled Description of operations). appliance while using it. The remote control provided has been designed to In addition: be functional and hard-wearing, however, it must be if there are other appliances using remote controls in handled cautiously. - Page 6 USER MANUAL Key/Display Operation Switching the appliance on and off It is possible to switch the appliance on or off (stand-by) by pressing the specific button. The control system of the appliance is equipped with a memory, so settings will not be lost if the appliance is switched off or in the power supply is cut.
- Page 7 USER MANUAL Key/Display Operation Fan speed control (models 8 and 10) By pressing this button several times, the speed will change according to the following sequence: Minimum, Medium, Maximum and Automatic The higher the speed is set, the better the appliance will perform, but it will be less quiet. By selecting Automatic mode (shown by three speed bars moving up and down on the display), the on-board microprocessor automatically adjusts the speed, so that it stays higher the greater the difference between the temperature detected and the temperature set.
-
Page 8: Setting Cool Only Or Heat Only Modes
USER MANUAL Setting cool only or heat only modes It is possible to deactivate the heating or the cooling only) mode. modes following a simple procedure. Press the A key again to switch back to HO (heating only) Keep the A key on the touch-screen display pressed for mode. -
Page 9: Suggestions For Power Saving
USER MANUAL Suggestions for power saving Always keep the filters clean (see maintenance and Do not block the air flow paths (input and output) cleaning chapter). of the unit; this, as well as causing a non-optimal Keep the doors and windows of the rooms to be air performance of the unit, will jeopardise the correct conditioned closed operation of the same and may cause irreparable... -
Page 10: Troubleshooting
USER MANUAL Troubleshooting In the even of a malfunction, please refer to the following table. If, please contact the authorised technical assistance. after performing the suggested checks, the problem is not solved, Fault Possible causes Solution Check there is power supply (by turning a light on, for example). Check that the thermal-magnetic circuit breaker used exclusively to protect No power supply The appliance... -
Page 11: Technical Specifications
Please read data plate to obtain the technical data listed below. Power supply voltage Maximum absorbed power Maximum absorbed current Amount of refrigerant gas Casing protection level 12 HP DC 10 HP DC 12 HP DC U.M. 8 HP 10 HP Inverter Inverter Inverter... -
Page 12: Periodic Maintenance
USER MANUAL 1.12 Periodic Maintenance The air conditioner you have bought has been designed to only include the following cleaning operations: keep maintenance operations to a minimum, in fact, they External cleaning Disconnect the unit from the power supply before Do not use abrasive sponges or abrasive or corrosive each cleaning and maintenance intervention by detergents as you might damage the painted surfaces. -
Page 13: Minimum System Requirements
App and install it following the wizard. Press the button as shown in the figure to start the automatic procedure for the recognition and WIFI connection on the Innova 2.0 network. (only on Android devices). If the automatic procedure does not start, it can be configured manually as indicated below. - Page 14 After activating the WIFI mode through the phone settings, access the available WIFI connection section, check for the presence of the Innova 2.0 network and connect to it. N.B.: with Android devices the procedure above is automatic, but for IOS devices you have to edit main settings of your phone /tablet and select the "Innova2.0"...
- Page 15 USER MANUAL At this point, a general air conditioner control screen will appear, by means of which you can control and manage your air conditioner 2.0. N.B.: from now on you will have the possibility to control the air conditioner via the local WIFI network, but not via Internet.
- Page 16 USER MANUAL At this point Innova 2.0 App will attempt to connect your unit to your home network; thus, smartphone air conditioner main screenshot for the management of the unit will appear again. From now on, your 2.0 is connected to the...
- Page 17 USER MANUAL Figure 2-21 Figure 2-22 Figure 2-23 Follow the procedure indicated above to add on and off times during the day. It is possible to program multiple on and off times with minimum intervals of thirty minutes in the same day. If you want to repeat these periods in other days of the week, it will be possible by following the instructions shown in the figures below.
- Page 18 USER MANUAL After finishing the programming operation, the screen of the operating mode will be as in Figura 2-27 3. If we then go back to the main screen of the air conditioner as in Figura 2-28 at the bottom, the time of the first start-up of the air conditioner will be displayed if the off time is scheduled.
- Page 19 NOTES...
- Page 20 INNOVA s.r. l . INNOVA s.r.l. Fraz . St rada, 16 - 38085 PIEVE DI BONO (TN) - ITALY Via I Maggio 8 - 38089 STORO (TN) - ITALY tel. +39.0465.670104 fax +39.0465.674965 tel. +39.0465.670104 fax +39.0465.674965 info@innovaenergie.com info@innovaenergie.com N273027C - Rev. 00...
Need help?
Do you have a question about the 10 HP DC and is the answer not in the manual?
Questions and answers