Console Connections - ADDER ADDERView Secure AVS 2114 User Manual

Console connections

The video display(s), keyboard, mouse and speakers
are attached to the various connectors on the rear
panel that constitute the console port. Note: The
secure switch can be used either with video display(s)
connected to the console ports (KVM configuration) or
alternatively with displays connected to each computer to
allow the operator to view them all simultaneously (KM
configuration) - see page 15.
AVS 2114 and 2214 units support single Link DVI video resolutions up to 1920 x 1200 @ 60Hz.
AVS 4114 and 4214 units support DisplayPort or HDMI video resolutions up to
3840 x 2160 @ 60 Hz.
To make console connections
1 Attach the primary video display to the
upper video connector.
2 Where a secondary video display is also to
be used, repeat step 1 for the lower video
connector.
DVI connection to
primary video display
DVI connection to
secondary video display
DisplayPort or HDMI connection
to primary video display
DisplayPort or HDMI connection
to secondary video display
Console
Port
12V 2.5A RCU
PRIMARY
SECONDARY
CONSOLE 4
12V 2.5A RCU
PRIMARY
CONSOLE 4
3 Connect the USB leads from the console
mouse and keyboard to the two sockets on
the rear panel.
4
DVI version
4 Insert the lead from the console speakers
into the 3.5mm audio output socket on the
rear panel.
DisplayPort/HDMI
version
USB connections to
console keyboard
and mouse
Connection to
console speakers
4
4
9