Appendix B - Hotkey Commands - ADDER ADDERView Secure AVS 2114 User Manual

Appendix B - Hotkey commands

This section provides a summary of hotkey commands used on the secure switch. In
each case, press and release the listed keyboard buttons in the order shown.
Toggle between mouse modes (Absolute)
(Relative)
Alter mouse speed (Increase)
(Decrease)
System reset to factory defaults
Enter Terminal mode
Exit Terminal mode
Display layout (2x2)
Display layout (4x1)
Upload mode
L CTRL | L CTRL | F11 | c
L CTRL | L CTRL | F11 | b
L CTRL | L CTRL | F11 | +
Note: Altering mouse speed is only available in Absolute mode.
L CTRL | L CTRL | F11 | -
Use main keyboard + and - , not the numeric keypad.
L CTRL | L CTRL | F11 | r
L CTRL | R CTRL | t
L CTRL | R CTRL | x
L CTRL | L CTRL | F11 | F1
L CTRL | L CTRL | F11 | F2
Note: The switch takes 5 seconds
L CTRL | L CTRL | L
before Upload mode becomes active.
20