Graco Fire-Ball D Series Instructions-Parts List Manual page 4

For pumping non–corrosive and non-abrasive oils and lubricants only

Hide thumbs Also See for Fire-Ball D Series:

Table of Contents

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and

result in a fire or explosion and serious injury.

D Ground the equipment. Refer to Grounding on page 7.

D If there is any static sparking or you feel an electric shock while using this equipment, stop

dispensing immediately. Do not use the equipment until you identify and correct the problem.

D Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid

being dispensed.

D Do not smoke in the dispensing area.

MOVING PARTS HAZARD

Moving parts can pinch or amputate your fingers.

D Keep clear of all moving parts when starting or operating the pump.

D Before servicing the equipment, follow the Pressure Relief Procedure on page 8 to prevent the

equipment from starting unexpectedly.

308608K

WARNING

Table of Contents

Show Quick Links

Table of Contents

Fire-ball 425 238108