Hayward HydroRite UVO3 Troubleshooting Manual page 18

UV Lamp Removal & Replacement (cont.)
6. Remove the lamp by grasping the lamp
connector and rotating counter-
clockwise to unlock the lamp from the
nut (Fig. 14).
7. Once unlocked, slowly pull the lamp
straight up and away from the quartz
sleeve until it clears the vessel (Fig. 15).
Carefully place the lamp(s) in a safe
location while cleaning the quartz sleeve.
CAUTION: The UV lamp is sensitive to
handling and should be allowed to fully cool
before being moved. Wait at least 30 minutes
after disconnecting power to begin the
removal process.
18
Fig. 14
Fig. 15