GRAPHTEC CE6000 Replacement Manual page 4
New procedure to replace the main board
Hide thumbs
Also See for CE6000:
- User manual (260 pages) ,
- Setup manual (21 pages) ,
- Service manual (203 pages)
Advertisement
(5) The READY will be displayed after the backup was finished.
Turn off the power the after backup was finished.
The backup will be finished in about 30 seconds.
(6) Turn on the power while pressing the down arrow key and the ENTER key.
The following menu is displayed.
(7) Confirm that serial number is correct with the backup procedure.
And confirm the SERIAL_NUMBER and FACTORY_VALUE are showing the "OK".
(8) Turn off the power for the CE6000.
4/4
Advertisement
