Commissioning - Evoqua WALLACE & TIERNAN SFC fieldbus Manual

4.
SFC fieldbus module retrofit set
Installation
4.8

Commissioning

4.8.1 Configuring the fieldbus module
As soon as the SFC has detected the fieldbus module the gateway
configuration menu is accessible.
Select MENU -> Inputs/Outputs -> Fieldbus to configure the
settings for the various bus systems.
Profibus DP In Profibus DP the Profibus address can be set to any value
between 0 - 126.
Profinet In Profinet the device name needs to be configured. The maximum
length of the device name is 16 characters.
Modbus TCP In Modbus TCP the TCP/IP settings need to be configured.
Please note
Whenever the fieldbus settings are changed the fieldbus module
restarts.
68
WT.050.590.002.DM.IM.1218