Connecting The Fieldbus - Evoqua WALLACE & TIERNAN SFC fieldbus Manual

4.
Installation
66
3 Screw the fieldbus module onto the spacer bolts using the four
M4x6 screws (E).
4 Plug the cable connector into the RJ25 socket on the fieldbus
module and the RJ25 socket on the front panel board in the
housing cover.
4.5

Connecting the fieldbus

Connect the fieldbus cable(s) to the adapter board on the fieldbus
module as shown on the wiring diagram in chapter 5.
SFC fieldbus module retrofit set
WT.050.590.002.DM.IM.1218