3.
Description
Profinet
58
SFC fieldbus module retrofit set
The Profinet slave needs to be configured as follows on the
Profinet master:
Inputs:
•
"INPUT: 002 bytes
•
"INPUT: 016 bytes
•
"INPUT: 064 bytes
Outputs:
•
"OUTPUT: 032 bytes
•
"OUTPUT: 004 bytes
•
"OUTPUT: 002 bytes
In the example given above the input data from the SFC Profinet
slaves are in the address range 0 - 81. This means that the data
point "Measurement Value" can be read as an input double word
with address offset 02.
(e.g. input address 0 - 1)
(e.g. input addresses 2 - 17)
(e.g. input addresses 18 - 81)
(e.g. output addresses 10 - 41)
(e.g. output addresses 42 - 45)
(e.g. input address 46 - 47)
WT.050.590.002.DM.IM.1218