Assembly And Adjustments - Vermeiren Cadeo User Manual

4

Assembly and adjustments

4.1 Height adjustments
CAUTION
• Firmly fix the handgrips before using
the rollator.
• Do
not exceed
maximum adjustment as indicated on
the handgrips. Your rollator will not be
stable anymore.
The pushing handles can be adjusted in
height according to the following steps:
1. Loosen knob (2) for height adjustment.
2. Remove the knob completely.
3. Remove the bolt (11) from the tube.
4. Adjust the pushing handles to the desired
height (6 different positions). When
standing straight, the handles should be
as high as your wrists. Leave your arms
hanging loose.
5. Place bolt (11) back in the hole of the tube.
6. Place knob (2) on bolt (11).
7. Tighten knob (2) firmly by hand.
8. Adjust the other pushing handle with the
same instructions.
9. Check that the two pushing handles are
adjusted with the same height.
11
2
4.2 Mounting the storage bag
CAUTION
Do not overload the storage bag.
The storage bag is meant to be mounted
below the seat.
Mount the storage bag with the snap
fasteners (12) on the two horizontal tubes
where the seat rests on.
Risk of falling
the minimum or
2
Risk of falling
The maximum carrying weight of the storage
bag can be found in the table of §7.
3
Cadeo
2020-01
Assembly and adjustments
12
EN
NL