Assembly And Adjustments; Using Your Rollator - Vermeiren 286B User Manual

4

Assembly and adjustments

4.1 Assembly
1. Slide the handgrips in the front frame.
2. If needed, adjust the cables connected to
the brakes.
3. Adjust the handgrips to the desired height
(see §4.2).
4.2 Height adjustments
CAUTION
• Firmly fix the handgrips before using
the rollator.
• Do
not exceed
maximum adjustment as indicated on
the handgrips. Your rollator will not be
stable anymore.
• Use the pushing handgrips
only parallel to the walking
direction of the rollator.
The rollator can be altered in height
by adjusting the handgrips:
1. Unlock/release the lever (1) on the side.
2. Slide the handgrip (2) up/down in the
frame tube (3) to the desired height.
3. Lock the handgrip again firmly.
4. Repeat for the other handgrip.
Make sure that both handgrips have been set
to the same height.
1
3
4.3 Adjusting the brakes
The force of the brakes can be adjusted by
loosening/tightening the screw (4) on the back
of the brake lever.
Risk of falling
the minimum or
2
4.4 Mounting the basket
CAUTION
Do not overload the basket.
The shopping basket is meant to be mounted
on the front side. Two hooks will mount the
shopping basket to the rollator frame.
5

Using your rollator

5.1 Unfolding / folding
CAUTION
Keep fingers, buckles, jewellery and
clothes away from the folding mechanism.
CAUTION
Check that the rollator is completely open
and that the frame is locked.
1. Push the lever on the right side of the
upper frame (5) upwards.
2. After releasing the lever, pull up the tube
(6) under the seat.
3. To unfold the rollator, repeat the above
steps in reverse order.
5
3
2024-03
4
Risk of falling
Risk of entrapment
Risk of falling
6
EN
286B
NL