Assembly And Adjustments - Vermeiren 286B User Manual

EN
NL
4

Assembly and adjustments

4.1 Assembly
1.
Slide the handgrips in the front frame.
2.
If needed, adjust the cables connected to
the brakes.
3.
Adjust the handgrips to the desired height
(see §4.2).
4.2 Height adjustments
CAUTION
• Firmly fix the handgrips before using
the rollator.
• Do
not
maximum adjustment as indicated on
the handgrips. Your rollator will not be
stable anymore.
• Use the pushing handgrips
only parallel to the walking
direction of the rollator.
The rollator can be altered in height by
adjusting the handgrips:
1. Unlock/release the lever (1) on the side.
2. Slide the handgrip (2) up/down in the
frame tube (3) to the desired height.
3. Lock the handgrip again firmly.
4. Repeat for the other handgrip.
Make sure that both handgrips have been set
to the same height.
Risk of falling
exceed the minimum
2
1
3
4.3 Adjusting the brakes
The force of the brakes can be adjusted by
loosening/tightening the screw (4) on the back
of the brake lever.
4.4 Mounting the basket
or
CAUTION
Do not overload the basket.
The shopping basket is meant to be mounted
on the front side. Two hooks will mount the
shopping basket to the rollator frame.
4
286B
2019-10
Assembly and adjustments
4
Risk of falling