Setting the Phone Line Type
If you are connecting the machine to a line that features a PABX
(PBX) or ADSL to send and receive faxes, it is also necessary to
change the Phone Line Type accordingly by completing the following
steps.
1
Menu/Set
Press
2
Press
or
▲
Australia and New Zealand only), ADSL , ISDN (or Normal ).
Menu/Set
Press
3
Stop/Exit
Press
PABX and TRANSFER
The machine is initially set to be connected with PSTN (Public
Switched Telephone Network) lines. However, many offices use a
central telephone system or Private Automatic Branch Exchange
(PABX). Your machine can be connected to most types of PABX.
The machine's recall feature supports timed break recall only (TBR).
TBR will work with most PABX systems allowing you to gain access
to an outside line, or transfer calls to another extension. The feature
works when the
■
You can program a
stored in a One-Touch or Speed-Dial location. When
programming the One-Touch or Speed-Dial number
(Menu/Set 2-3-1 or 2-3-2) press
displays "!"), then enter the telephone number. If you do this,
you do not need to press
using a One-Touch or Speed-Dial location. (See Storing
numbers for easy dialling on page 5-1.)
■
For FAX-1840C, press
holding down the Shift key.
2 - 3 GETTING STARTED
0
5
,
,
.
to select PBX (For
▼
.
.
Hook
key is pressed.
Hook
keypress as part of a number
Hook
Hook
each time before you dial
Hook/Hold/Recall
5.Phone Line Set
first (the screen
key while