Printing Reports; Fax Settings And Activity; Customizing The Transmission Verification Report - Brother FAX-3240C User Manual

7

Printing reports

Fax settings and activity

You need to set up the Transmission Verification Report and Journal
Period in the menu table.
Menu/Set
Press
—OR—
Menu/Set
Press
Customizing the Transmission Verification
Report
You can use the Transmission Report as proof that you sent a fax.
This report lists the time and date of transmission and whether the
transmission was successful (OK). If you select On or On+Image , the
report will print for every fax you send.
If you send a lot of faxes to the same place, you may need more than
the job numbers to know which faxes you must send again. Selecting
On+Image or Off+Image will print a section of the fax's first page
on the report to help you remember.
When the Verification Report is turned Off or
Trans:Off+Image , the Report will only print if there is a
transmission error, with NG in the RESULT column.
1
Menu/Set
Press
2
Press or
▲
On , On+Image or Off .
Menu/Set
Press
3
Stop/Exit
Press
2 4 1
, , , .
2 4 2
, , , .
2 4 1
, , , .
to select Off+Image ,
▼
.
.
1.Transmission
2.Journal Period
1.Transmission
PRINTING REPORTS 7 - 1