Brother FAX-3240C User Manual page 115

ERROR MESSAGES
ERROR CAUSE
MESSAGE
The print head is too warm.
High
Temperature
One or more of the ink cartridges
Ink Empty
is empty. The machine will stop all
print operations. While memory is
available, black and white faxes
will be received into memory. If a
sending machine has a colour fax,
the machine's 'handshake' will
request that the fax be sent as
black and white. If the sending
machine has the ability to convert
it, the colour fax will be received
into memory as a black and white
fax.
The print head is too cold.
Low
Temperature
One or more of the ink cartridges
Near Empty
are running out of ink. If a sending
machine has a colour fax, the
machine's 'handshake' will
request that the fax be sent as
black and white. If the sending
machine has the ability to convert
it, the colour fax will be received
into memory as a black and white
fax.
An ink cartridge is not properly
No Cartridge
installed.
The machine is out of paper.
No Paper Fed
The paper is jammed in the
machine.
The number you dialled does not
No
answer or is busy.
Response/Busy
You tried to access a One-Touch
Not
or Speed-Dial number that is not
Registered
programmed.
10 - 2 TROUBLESHOOTING AND ROUTINE MAINTENANCE
ACTION
Allow the machine to cool down.
Replace the ink cartridges.
(See Replacing the ink cartridges on page
10-23.)
Allow the machine to warm up.
Order a new ink cartridge.
(See Replacing the ink cartridges on page
10-23.)
Take out the ink cartridge and put it in again
seating it properly.
(See Replacing the ink cartridges on page
10-23.)
Add paper, and then press Mono Start or
Colour Start.
See Printer jam or paper jam on page 10-5.
Verify the number and try again.
Set up the One-Touch or Speed-Dial number.
(See Storing One-Touch Dial numbers on page
5-1 and Storing Speed-Dial numbers on page
5-2.)