Casio IT-G600 Series User Manual page 48

Installing and Connecting the Power Supply
Use the optional AC adaptor(AD-S50400A) to supply power to the charger.
Use the selector switch on the left side of the
Ethernet Cradle to select the port to be used. Set
the switch to the "LAN" position when using the
LAN port on the cradle. Set the switch to the "B"
position when using the unit as a USB client, or set
it to the "A" position when using the unit as a USB
host.
1. Plug the AC adapter into the AC adapter jack
on the back of the Ethernet Cradle.
2. Plug the AC adapter into a mains power outlet.
3. When using a LAN, plug the LAN cable into
the LAN port and then connect the cable to the
computer or to a hub.
4. Align the terminals on the bottom of the
IT-G600/IT-G650 with the power supply
terminals in the Ethernet Cradle before inserting
the IT-G600/IT-G650 (
IT-G650 fully into the Ethernet Cradle until the
mount hooks in the cradle engage the mount
holes in the IT-G600/IT-G650 (
To remove the IT-G600/IT-G650 from the
Ethernet Cradle, tilt the IT-G600/IT-G650
forward to disengage the mount hooks from the
mount holes and then lift the IT-G600/IT-G650
out of the cradle.
46
). Push the IT-G600/
).
PC or hub.