Casio IT-G600 Series User Manual page 31

5 Insert the nanoSIM card tray in the direction indicated by the arrow.
6. Install the battery pack.
(Steps 2 and 3 in the battery pack installation procedure on page 19)
Removal
1. Turn the terminal off (shutdown).
2. Remove the battery pack.
(Steps 5 and 6 in the battery pack replacement procedure on page 21)
3 Remove the nanoSIM card tray.
(Step 3 on page 28)
4 Remove the nanoSIM card from the nanoSIM card tray.
5 Install the nanoSIM card tray in the terminal.
6. Install the battery pack.
(Steps 2 and 3 in the battery pack installation procedure on page 19)
Precautions for Use
• When installing a nanoSIM card, check the orientation of the card and ensure that
you install it correctly. Using excessive force when installing or removing a nanoSIM
card could damage the card.
• Touching the contact area when installing a card could result in damage to the card
due to soiling or an electrostatic charge.
• When turning off the terminal, be sure to select "Power off" and not "Hot swap".
• Always install the nanoSIM card tray, even when no nanoSIM card is used.
29