Network Hardware Connection; Shut Down - Abbott Merlin 2 PCS User Manual

Network Hardware Connection

You can connect the Merlin™ 2 PCS to a network using the wired ethernet network connection on
the back of the programmer.
Figure 10. Network hardware connection

Shut Down

To power down the Merlin™ 2 PCS:
1. Remove any cables connecting the Merlin 2 PCS to the patient.
2. Move the On/Off switch to the Off position.
The Merlin 2 PCS has a power switch that, when shut off, isolates both conductors of the supply
mains simultaneously.
14